INDUSTRIAL EPOXY MORTAR
It is a troweled seamless industrial flooring system comprised of a specially formulated two-component epoxy resin formulation incorporating suitable chemical resistant aggregates. It can incorporate an integral sanitary coved base. EPOXY MORTAR is resistant, to a wide range of acids, bases, solvents, oils and food fats.
Advantages:
|
| 1. | Monolithic: Can incorporate integral cove base.
|
| 2. | Chemical Resistance (see Chemical Resistance Chart).
|
| 3. | Produces a rapidly installed seamless floor at moderate cost. It installation may be placed in service within 24 hours in cases where preparation work is minimal.
|
| 4. | Installed only by Professional Factory Trained Contractors.
|
Technical Information:
|
| 1. | Compressive Strength ASTM C579 | 10,000 psi (Resin, Hardener and Aggregate) |
| 2. | Compressive Strength ASTM D695 | 11,000 psi (Resin and Hardener) |
| 3. | Tensile Strength ASTM C307 | 1,640 psi (Resin, Hardener and Aggregate) |
| 4. | Tensile Strength ASTM D638 | 4,000 psi (Resin and Hardener) |
| 5. | Flexural Strength ASTM C580 | 4,300 psi |
| 6. | Bond Strength ASTM D4541 | >400 psi (100% concrete failure) |
| 7. | Indentation Characteristics (Impacted Load) | MIL-D-3134, Para. 4.7.3 (2 lb. Ball dropped twice from 8 ft. height) No chipping, cracking, loss of adhesion, Indentation 0.024” Gardner Impact Tester, 160 in/lbs. No cracking or detachment. Indentation 0.014” |
| 8. | Abrasion Resistance ASTM D4060 | (CS17, 1000gr load, Cycles) 0.04 gr |
| 9. | Flammability ASTM D635 | Self-extinguishing by this test (0.6”) |
| 10. | Water Absorption MIL-D-3234 | 0.3% |
| 11. | Surface Hardness ASTM D2240 Shore D | 80-85 |
| 12. | Chemical Resistance (See Chemical Resistance Chart) | |